Hull cutoff
The Hull cutoff and Brillouin flow in a magnetron: critical magnetic field of a planar and a coaxial magnetron against anode voltage, and the Brillouin density limit of the electron cloud.
Electrons leaving the cathode just graze the anode when , with for a plane and for coaxial cylinders. Above the cutoff the discharge is insulated and the electrons form a rotating cloud, whose density cannot exceed the Brillouin value .
Source code
Section titled “Source code”import matplotlib.pyplot as pltimport numpy as np
from plasma_plots.theory import magnetron
voltage = np.geomspace(50, 2000, 100)b_planar = magnetron.hull_cutoff(voltage=voltage, gap=0.05)b_coax = magnetron.hull_cutoff(voltage=voltage, anode_radius=0.06, cathode_radius=0.01)
field = np.geomspace(1e-3, 0.2, 100)flow = magnetron.brillouin_flow(field, radius=0.02)
fig, (ax_h, ax_b) = plt.subplots(1, 2, figsize=(10, 4), layout="constrained")ax_h.loglog(voltage, b_planar * 1e3, lw=2, label="planar, $d$ = 5 cm")ax_h.loglog(voltage, b_coax * 1e3, lw=2, label=r"coaxial, $r_a$ = 6 cm, $r_c$ = 1 cm")ax_h.set( xlabel="anode voltage (V)", ylabel="Hull cutoff field (mT)", title="Insulated above each curve", ylim=(0.3, 20),)ax_h.legend(frameon=False, loc="lower right")
ax_b.loglog(field * 1e3, flow["density"], lw=2, color="C2")ax_b.set( xlabel="magnetic field (mT)", ylabel=r"Brillouin density (m$^{-3}$)", title="Brillouin flow limit",)
print( f"Brillouin flow at 50 mT: n = {magnetron.brillouin_flow(0.05)['density']:.3e} m^-3")print( f"300 V, 5 cm gap: B_c = {magnetron.hull_cutoff(voltage=300.0, gap=0.05) * 1e3:.3f} mT")plt.show()Printed output
Brillouin flow at 50 mT: n = 1.215e+16 m^-3300 V, 5 cm gap: B_c = 1.168 mT